Care Guide
Step 1. Clean the boots with water and a brush.
Natural rubber and neoprene upper are very durable, feel free to use the brush to clean with a spray of water or scrubbing with soap and cold water gentlely.
Step 2. Dry the boots, naturally.
Keep your boots in a dry and ventilated place, away from direct sunlight and away from any heat source. Let the boots air dry.
If the boots get wet, dry the lining thoroughly before starting to use them again. Crumpled newspaper can be used to help with the drying.
Step 3. Store your boots in dry, cool place.
Store your cleaned boots away directly from the sunlight. Put them in dry and cool place, away from other heat sources.
If you want, you can also nourish the boots with some wax polish to add extra protection to your boots.
How to Wash and Dry
Gently brush off dirt and other contaminants using a soft brush or cloth. Clean the surface with cold clean water, wipe dry with cloth.
Do not soak your PVC boots in solvents or heavy detergents.
Do not dry or store the PVC boots in direct sunlight or near a heat source.
Wipe down the insides of your boots and wash the footbeds using a mild detergent and water as required.
How to Clean Waders
Keep your waders on when cleaning.
Wet your waders with a low-pressure hose.
Rinse off mud, dirt, and debris with fresh water. For stubborn stains, use a soft brush and mild soap
Rinse thoroughly with low-pressure water.
How to Dry Waders
Hang to air dry in a shaded area away from direct heat and sunlight.
Avoid using a blow dryer or heat, as it can damage your waders.
Allow them to air dry completely, which may take several hours or overnight.
Once boots are cleaned and dried, apply boot/rubber conditioner to prevent cracking.
Wader Storage
Turn them inside out.
Store in a cool, dry place.
Hang or lay flat to avoid creases.
Avoid sharp objects that could puncture or tear the fabric.
Consider using a wader bag for added protection.
Regularly check on stored waders to ensure they remain in good condition.
Addtional Tips
To ensure your waders are ready for action season after season, steer clear of these common pitfalls:
Allowing waders to remain wet, which can lead to mold and mildew.
Skipping a thorough cleaning before storage, leaving behind odors from previous hunts.
Folding or compressing waders incorrectly, risking creases and tears.
Neglecting to address any signs of mold or mildew promptly.
Forgetting to inspect waders regularly for wear and tear.